BDRSX - M-1364 CLEAR ADHESIVE TYPE II, MMM-A-105

  • MSDS: BDRSX
  • Manufacturer: SEAGRAVE CORP TITANINE DIV
  • Product Name: M-1364 CLEAR ADHESIVE TYPE II, MMM-A-105
  • National Stock Number: 8040-00-270-8150
Product Identification

Product ID:M-1364 CLEAR ADHESIVE TYPE II, MMM-A-105
MSDS Date:05/05/1987
FSC:8040
NIIN:00-270-8150
MSDS Number: BDRSX

Responsible Party
SEAGRAVE CORP TITANINE DIVISION
320 PATERSON PLANK RD
CARLSTADT, NJ 07072-2302
US

Emergency Phone: (201)933-1000

Info Phone: (201)933-1000

Preparer: STEVENS INDUSTRIES

Cage: 78767

Contractor
SEAGRAVE CORP TITANINE DIVISION
CARLSTADT, NJ 07072-2302 US

Cage: 78767

Ingredients

LACTOL SPIRITS

CAS: 64742-89-8

Fraction By Weight: Fraction by Wt

OSHA PEL N/K

ACGIH TLV: N/K


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: Fraction by Wt

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: Fraction by Wt

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ROUTE OF ENTRY-EYE:YES. ACUTE:PALE,
NAUSEOUS, DIZZY, WEAKNESS. CHRONIC:UNKNOWN.
Explanation of Carcinogenicity:NOT APPLICABLE
Effects of Overexposure:POSSIBLE DIZZINESS, HEADACHE, NAUSEOUS, WEAK OR
IRRITATION.

First Aid

First Aid:TREAT SYMPTOMATICALLY-CONSULT PHYSICIAN.EYE: IMME FLUSH W/LGE
AMTS OF WTR FOR AT LEAST 15 MIN.TAKE TO PHYSICIAN. INHAL:RMOV TO
FRESH AIR.SUPPORT BREATHING(GIVE ARTIFICIAL RESPIRATION .TREA T
SYMPTOMATICALLY-CONSULT PHYSICIAN.INGES:DRINK 1-2 GLASSES OF WTR TO
DILUTE. DO NOT INDUCE VOMITING. CONSULT PHYSICIAN. SKIN:WASH W/SOAP
& WTR, RMOV CONTAM CLOTHING,CONSULT PHYSICIAN IF NEEDED.

Fire Fighting

Flash Point Method:TCC
Flash Point:21F/-6.1C
Lower Limits:1.4
Upper Limits:12.0
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:DO NOT USE WATER-EXCEPT W/FOG NOZZLES. USE
NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DO NOT USE ON HOT SURFACES/IN AREA WHERE
ELEC SPRK MAY BE PRSNT/WHERE STATC CHARGE MAY BE GEN.DUE TO EXTREML
HEAT EXPOS,PRESS MAY BUILD UP IN CLOSED (SUP DAT)

Accidental Release

Spill Release Procedures:REMOVE ANY SOURCE OF SPARK/FLAME,PROVIDE
IMMEDIATE VENT, AVOID BREATHING VAPORS & WEAR APPROPRIATE
RESPIRATOR. ADD ABSORBENT TO SPILL, PLACE IN SEALED METAL
CONTAINERS USING NON-SPARKING TOOLS.
Neutralizing Agent:N/K .

Handling

Handling and Storage Precautions:STORE IN RED LABEL AREA IN ORIGINAL
CONTAINERS.
Other Precautions:GROUND ALL EQUIPMENT & CONTAINERS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED CHEMICAL FILTERS DESIGNED TO
REMOVE A COMBINATION OF PARTICLES/VAPORS. IN CONFINED AREAS
APPROVED AIR LINE TYPE RESPIRATORS OR HOODS.
Ventilation:NECESSARY, LOCAL EXHAUST-RECOMMENDED.
MECHANICAL-ACCEPTABLE. SPECIAL-WEAR DUST MASK WHILE SANDING DRY
PAINT FILM.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKER GOGGLES.
Other Protective Equipment:APRON & BOOTS RECOMMENDED. IF SKIN CONTACT
IS LIKELY USE PROTECTIVE SKIN CREAM. EYE BATH & SAFETY SHOWER.
Work Hygienic Practices:N/K
Supplemental Safety and Health
BP:175-232F/79.4-111.1C.% VOLT:N/K . PH:N/K .UNUS FR&EXPLO
HAZ:CNTNR,WHCH MAY EXPLODE.WTR MAY BE USED TO COOL UNRUPTURD CNTNR.

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:175-232F
Melt/Freeze Pt:M.P/F.P Text:N/APPLICABL
Decomp Temp:Decomp Text:N/K
Vapor Density:HV THN AIR
Spec Gravity:0.90
Evaporation Rate & Reference:N/K
Solubility in Water:NONE
Appearance and Odor:LIQUID - MILD
Corrosion Rate:

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:EXCESSIVE HEAT AND FIRE
Hazardous Decomposition Products:OXIDES OF CARBON
Conditions to Avoid Polymerization:HIGH TEMPERATURE

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL,STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.